Open, easy to clean and great for small rooms, walk-in showers are one of our most requested features. Here's what you need for one to work well.
Walk-in showers are one of the most popular requests we get. With no door to open, no tight corners to scrub and often no step to trip over, they look clean and modern and are easy to live with. But they don’t suit every room, and the details make the difference between a shower that works and one that floods the floor.
What counts as a walk-in shower?
A walk-in shower is usually an open shower with a single fixed glass panel (or a wall) instead of a door. Many are also level-entry, meaning the shower floor is flush with the rest of the bathroom rather than sitting behind a hob or step.
The benefits
- Easier to clean. Fewer hinges, seals and tracks to collect grime.
- Makes small rooms feel bigger. One clear panel lets the eye run across the whole floor.
- Accessible. A level-entry shower suits young children, older family members and anyone planning to stay in their home long term.
- Timeless. A simple panel and good tiling date far more slowly than heavily framed screens.
What you need for it to work
Enough space
Without a door, water needs room to land before it reaches the dry part of the bathroom. As a rough guide, a walk-in shower works best with a shower area of at least about 900 mm by 1,200 mm, and more is better. In tighter rooms, a hinged door or a return panel might be the more practical choice.
The right floor falls
The shower floor has to fall towards the drain so water doesn’t spread. In a level-entry shower this is critical, because there’s no hob to hold water back. Getting the falls right is skilled work, and on timber-framed floors it can mean lowering or reworking the floor structure.
The right drain
A linear (strip) drain along the back wall or entry lets the floor fall in one direction, which suits large-format tiles and level entries. A traditional centre drain is still fine in many showers, but it limits tile sizes because the floor slopes in four directions.
Good waterproofing
Waterproofing is the most important part of any bathroom, and it matters even more without a hob. In Queensland, waterproofing must be done by a licensed waterproofer and installed to the Australian Standard. It’s one of the jobs that should never be cut short. Our article on DIY bathroom renovations in Queensland explains why.
Thoughtful shower head placement
Point the main shower head away from the open side. A rail shower or a fixed head on the back wall keeps most of the spray contained.
Design ideas that work well
- Recessed niche for bottles, so nothing clutters the floor or glass.
- Matt or textured floor tiles for slip resistance.
- Feature wall in a contrasting tile at the back of the shower.
- Black, brushed or gunmetal panel frames to tie in with your tapware.
Is a walk-in shower right for you?
If you have the space and you’re replacing the floor anyway, a walk-in shower is usually a great choice. If the room is very small, or the floor structure makes falls difficult, there are often clever alternatives that give a similar look.
We’ve built walk-in showers in ensuites and main bathrooms across Brisbane. See our bathroom renovations, read our small bathroom ideas, or book a free onsite quote and we’ll tell you honestly what will work in your space.



